How To Fix Squeaky Office Chair? – 5 Solutions For 2023

Reviewed By Chiropractic Specialist

If you work in an office, chances are you’ll have to sit at a desk for long periods. And while not exactly fun, it’s also not the worst thing in the world.

It can be pretty enjoyable if your work environment has certain perks, like good coworkers and comfortable desk chairs.

But what if one of those chairs is a bit annoying? That’s right: an annoying squeaky office chair may be enough to drive you mad!

How exactly does one get a squeaky chair?

Well, many different factors can contribute to this problem. It could be because your chair has broken springs or support brackets underneath it.

Or perhaps it’s because all the wheels on the chair need some lubricant so they stop making that awful noise every time you move from left to right.

Let us learn more about how you can fix that noisy office chair!

Solutions to the Annoying Problem

Reasons Why Chairs Squeak

A squeaky office chair can be caused by a variety of issues, such as The springs inside the chair getting rusty and stiff, The chair’s wooden frame degrading over time,

The wheels of the chair need some lubricant,

The chair’s metal bolts need a little tightening. The chair is assembled incorrectly. Now, let’s see how you can fix each of these problems!

There are rusty and stiff springs inside the chair. Wooden frames degrade over time. It is necessary to lubricate the wheels of the chair.

The chair’s metal bolts need a little tightening. The chair is being assembled incorrectly.

Methods Of How To Fix Squeaky Office Chair

1

Tighten The Bolts And Screws

A squeaky chair is often caused by rusty metal parts that need lubrication and tightening.

Tighten The Bolts And Screws

If you are sure you’ve already tried to clean the rust off with a bit of oil or another cleaning agent, then it’s time to get out the toolkit and grab an adjustable wrench.

If you’re lucky enough to have a screwdriver that can be used as a wrench, you can skip this step and clean the rust off with a bit of oil.

2

Use Oil Or Lubricant To Clean Rust

If you’re not able to tighten the bolts or screws because they are already pretty loose and there is no way to make them tighter, or if you don’t want to go through the trouble, then you can use oil or lubricant to clean the rust off from the metal parts of the chair.

Use Oil Or Lubricant To Clean Rust

You might have to try a few different brands before you find one that works, but most oils and lubricants should do the trick.

You can also use WD-40 spray (that’s what it’s best at!) to clean the rust off the chair’s metal parts. But please, be careful when using it.

3

Apply Glue Or Wood-Swelling Liquid

If the squeaky chair’s bolts are too loose to clean off the rust, or if they are made of a material that doesn’t work well with oil, then you’ll have to apply glue or swell the wood with a wood-swelling liquid to prevent further squeaking.

Apply Glue Or Wood-Swelling Liquid

The best place to put the glue is where the chair and the frame meet each other. You can also set a bit of glue on the wheel rollers.

If you’re using a wood-swelling liquid, you should put a generous amount on the squeaky part of the frame (where the wheel and the chair meet).

4

Silicone Spray For Squeaky Office Chairs

Silicone spray is a great way to get rid of squeaking office chairs. It also has a bunch of other uses: it can be used to lubricate stuck door hinges, clean keyboards, and remove gum from hair.

Silicone Spray For Squeaky Office Chairs

If you’re sure metal parts do not cause your squeaky chair, then silicone spray is your best bet.

But be careful! Don’t put too much, or the chair will become super slippery, and you may lose your balance when you sit on it.

Wear gloves when applying silicone spray to the chair, and clean the chair with a damp towel once you’re done using the spray.

5

WD-40 For Squeaky Office Chair Wheels

WD-40 is an excellent lubricant that will clean the rust off the metal parts of your squeaky chair and prevent it from squeaking.

WD-40 For Squeaky Office Chair Wheels

WD-40 also has many other uses – it can remove gum from hair, clean keyboards, kill roaches, and even keep your car running smoothly when sitting for a long time.

You can apply WD-40 to the parts of the chair that make it squeak. Be careful not to put too much, as it can be slippery.

How To Lubricate Your Office Chair

A squeaky chair can occur for several reasons, and not all of them can be fixed with the same techniques.

So, before you try lubricating your chair, you should ensure you understand the problem’s root.

There are many different ways to go about lubricating your chair. You can buy a lubricant spray at the store and put it directly on the squeaky parts.

You can also buy a furniture polish that contains lubricants and put it on the parts of the chair that make it squeak. You can even use WD-40 – it’s an excellent lubricant and cheap!

Top Lubricants Suggestion

If all else fails, you can always buy lubricants to get your squeaky chair working correctly again.

For squeaky wheel rollers, you can use a silicone spray or WD-40. You can use oil or furniture polish for parts that need to be cleaned of rust.

And for parts that need to be glued together, you can use a wood-swelling liquid or glue.

It may take some trial and error to figure out which lubricant works best on your squeaky chair, but eventually, you will find something that works!

Final Thoughts

A squeaky chair is annoying, but it’s easy to fix. Before trying any of these solutions, you should ensure that the problem isn’t caused by broken springs or a broken chair.

If you’re unsure where the problem is coming from, it may be best to contact your company or seek professional help.

If you follow these tips, you can rest assured that your chair won’t be squeaking any longer.

Now you can enjoy your workday stress-free, knowing that you no longer have to put up with an annoying squeaky chair!

Frequently Asked Questions

Why does my office chair keep creaking?

The springs that cushion your chair when you lean back are one of the main causes of a squeaky chair. A seat-tension spring is one of these springs. The process of fixing these springs is fairly straightforward. It’s usually possible to ease up or tighten the tension with a knob.

Why is my office chair so noisy?

The noises usually result from wear on the washers that secure the ball bearings, along with the need to lubricate the chair’s moving components. Make sure the hydraulics in your chair are working. If not, you’ll also want to invest in a hydraulics repair kit

What can you do to stop squeaky chair springs?

When chair springs are properly lubricated, they will be noise-free and last for decades.
Put old sheets or other suitable drop cloths in front of your recliner.
On the springs and metal components, the springs have rubbed against, spray clear mineral oil.

Ron Mason
I, Ron Mason, am a retired forestry professional. My previous profession was that of an environmental educator, specifically as a Forester, with the USDA Forest Service. Additionally, I have worked as a contract forester in the private sector. With a strong background in science and engineering, my expertise lies in timber stand management, forest ecology, and wildlife biology. I am a dedicated woodworker and take pleasure in crafting furniture, tables, cabinets, and other wooden items as a hobby.