How To Raise Office Chair Without Lever: 6 Step Guide

Reviewed By Chiropractic Specialist

Raise Office Chair Without Lever is a process that can quickly be done without needing special tools. The process is relatively simple and can be done in a few minutes.

It is important to remember to be cautious when raising any office chair, as improper handling can cause damage to the chair or even injury.

Some steps to raising an office chair without using a lever:

1. Make sure the area around the chair is clear, and nothing can get caught in it as you raise it.

2. Find a sturdy object such as a table, bookcase, or another large thing that you can use to brace the chair as you raise it.

3. Place the object near the chair and make sure it is firmly in place.

4. Stand on the object and slowly lift the chair up using your legs and back.

5. When the chair has been raised to the desired height, adjust any knobs or levers that control the chair’s height.

6. Make sure the chair is secure and stable before sitting down.

This will help narrow your choices and make it easier to find the perfect chair for your needs.

Now that you know how to adjust an old office chair and what to look for when choosing a new one,

Source: YouTube

Types of Office Chairs


Non-Pneumatic Office Massage Chairs

Non-Pneumatic Office Massage Chairs

The rear leg of this chair is spring-loaded, and it works without applying air pressure.

A lever hidden beneath the seat may be utilized to raise or lower it. Pull up on the lever to raise a chair and release it when you reach your desired height.


Hydraulic Ergonomic Chairs

You won’t need one if you use a lever to change the height on a hydraulic ergonomic artist’s office chair.

Locate the release button on the side of the chair and push it down.

The chair will raise or lower depending on how much force you apply, which is determined by your stance.

After you’ve found the perfect height, press the button once.


Pneumatic Office Desk Chairs

Pneumatic Office Desk Chairs

The most common office desk chair is the pneumatic chair.

You may use a lever on the side to lower or raise the chair. Raise the chair by pulling up on the lever and then releasing it when you’ve reached your desired height.


Non-Adjustable Office High Chair

Non-Adjustable Office High Chair

If you’re using a non-adjustable office chair, there’s no way to alter the height.

Although these best office chairs are not as popular, they may still be found in some workplaces.

If you’re sitting in a non-adjustable chair, Your desk is set at the proper height.

how to raise office chair without lever Step guide

After you’ve chosen a suitable height for your office chair, the big question is how to adjust the ergonomic chair.

Changing office chair settings is not as simple as in prior versions.

They employ a rotational adjustment mechanism that can’t be operated while seated in the seat.

These simple steps should perform to adjust an office chair without a lever.

How To Raise Office Chair Without Lever

Set The Correct Chair Height

Before making any changes, you should decide how to adjust the chair height. Remember that each individual’s ideal size is dissimilar.

The office design, Inglesina’s fast table height, and other factors will determine the ideal chair height. They are essential factors to consider before making any changes.

To begin, adjust the chair to fit your workstation. There are significant differences in keyboard and object exposure levels between tables.

Confirm that your feet are planted firmly on the floor. For optimum comfort, the legs should be 90 degrees and the thighs horizontal.

Determine the optimum height adjustment afterward, then make a mark before standing. The brand will assist you in achieving an adjustment tailored to your demands.


Clockwise And Anticlockwise Adjust Movement

Now that you have the ideal height for your chair, it is time to start making adjustments. To do this, you must identify your chair’s clockwise and anticlockwise symbols.

The two symbols are usually located on either side of the seat near the base. Once you have found them, sit comfortably on the chair and place your feet flat on the floor.

If the arms of the chair are at the correct level, look for a knob or lever on the side of the seat. It will usually be located about halfway up the chair’s leg.

For gas lift chairs, turn the knob clockwise to raise the height of your seat and counterclockwise to lower it.

Your chair has a ratchet back. Push down on the lever to adjust the height.


Under Chair Bolt Adjustment

The adjustment bolt under your chair. This will allow you to adjust your chair’s backrest and seat height.

To do this, look for a knob or lever on the underside of the chair. It will usually be located near the back of the chair.

For gas lift chairs, turn the knob clockwise to raise the height of your seat and counterclockwise to lower it. If your chair has a ratchet back, push down on the lever to adjust the size.

Once you have found the bolt, sit in the chair and lean back until you find the perfect angle.

You should feel comfortable while sitting in the office chair. If you need to, readjust your seat height until you find the perfect position.


Sit On The Office Chair And Test It

After completing the adjustments, it is time to test the settings. Sit on the chair and see if it is comfortable.

Try leaning back in the seat to check if the arms are at a reasonable level.

You have now successfully adjusted your office chair height.

Remember to sit up straight and maintain good posture while working to prevent back pain.

And the same method is used how to adjust gaming chair height. If you experience any discomfort, Readjust the swivel chair until you find a cozy position.


How To Adjust Old Office Chair

If your old office chair is starting to feel uncomfortable, it may be time to adjust it. This is usually a simple process that only takes a minute.

  1. Look at the seat of your wooden chair. Is it level? If not, you may need to adjust the seat height. To do this, find the lever or knob under the seat and turn it until the seat is at the desired size.
  2. Check the backrest. Is it at a relaxed angle? If not, you can usually adjust it by finding the lever or knob on the back of the chair and turning it until the backrest is at the desired angle.
  3. Are armrests in a comfortable position? If not, you can usually adjust them by loosening or tightening the screws that hold them in place.
  4. Once you’ve made the necessary adjustments, your old office chair should be much comfier.

Why Do We Have To Raise The Seat?

The advantages of elevating the workplace chair according to your height, in general, It is a suitable size aid upgrade by allowing you to sit further back and concentrate better.

It helps with improving and persevering when working and healthy sitting posture for your back and neck.

Subsequently, assist in limiting the pain caused by bad sitting postures.

Using a legitimate height executive seat improves workers’ usefulness since they can work for more extended periods with less risk of weakness.

Why do we have to raise the seat?

A Comfortable Sitting Position

If the chair is less than or equal to the table’s height, or if the individual is only raised for a moment, you may need to elevate the chair in order to carry it.


Avoid Back And Neck Pain

Aside from that, if you continue to sit on a low chair, you may get back discomfort, your posture will be altered, and you’ll have to incline toward the table. 

People who spend long hours in a bad sitting posture are more prone to musculoskeletal problems. 

A correct sitting posture and chair height have been shown in studies to help prevent musculoskeletal pain.


Good Posture For Neck And Back

Rather than suffering from neck or back pain, it’s best to adjust the height instead of acquiring them because you spend most of your time in the office sitting on that chair.

How to determine a good chair height?

Which Platform To Raise Chair Height
  1. Your height
  2. Seat height(using different kinds of shoes)
  3. Backrest height
  4. Seat depth
  5. Armrest height
  6. Seat width

how to increase an office chair height FAQs

How do you lift an old office chair?

Turn the chair upside down and stand on its feet. To prevent the base from turning, place one foot against it. To lower or increase the height, spin the chair in a clockwise or counterclockwise direction. The measured size must be reached by spinning the chair.

What is the knob under my office chair?

The tension knob, on the other hand, is a knob that can be turned to enhance or decrease the amount of force necessary to tilt. So a tension tilt mechanism allows you to choose how far back you want to recline in a chair and how much force is required.

Why won’t my office chair go up?

This is the issue if your office chair won’t rise or descend. The most common problem is a faulty gas cylinder or lift mechanism. Rather than replacing the entire chair, you may try to obtain a new gas cylinder and replace it yourself. Alternatively, choose to have a professional chair repair business do it for you.

How do you adjust an office chair tilt?

The tilt tension adjuster is a knob underneath the chair’s seat. This knob can be turned to increase or decrease the amount of force required to tilt the chair. Turning the knob clockwise will increase the required force while turning it counterclockwise will reduce the force needed.

What is pneumatic seat height adjustment?

Pneumatic seat height adjustment is a feature on many office chairs that allows the user to adjust the chair’s height with a lever or knob. This convenient feature allows you to adjust the chair to your desired size without repeatedly getting up and down.

What is a chair tilt lock?

A chair tilt lock is a mechanism that locks the chair’s tilt in place. This can be useful to prevent the chair from tilting back too far and tipping over. It can also be used to keep the chair upright if desired.

How does an office chair go up and down?

An office chair typically goes up and down with a gas cylinder or lift mechanism. The gas cylinder is located under the chair’s seat and allows the chair to be raised or lowered. The lift mechanism is located under the base of the chair and is what allows the chair to tilt back and front.

Why is my chair going down?

If your chair is slowly sinking, this is most likely due to a faulty gas cylinder. The gas cylinder holds the chair up and allows it to be raised or lowered. Over time, the gas cylinder can lose its ability to hold the chair up, resulting in a slow descent.

How do I fix a broken office chair?

If your office chair is broken, there are mini things you can do to try and fix it. If the problem is with the gas cylinder, you may be able to replace it yourself. Alternatively, you can choose to have a professional chair repair business do it for you. If the problem is with the lift mechanism, you may be able to fix it yourself or have a professional do it for you.

What is an office chair base?

The base of an office chair is the part of the chair that sits on the ground and supports the rest of the chair. The base can be made from many materials, such as plastic, metal, or wood.

How do you raise a chair with a lever?

To raise a chair with a lever, Locate the lever under the chair’s seat. Then, use your hand to push down on the lever while simultaneously lifting the chair. The chair should begin to rise. To lower the chair, reverse the process by pushing up on the lever and simultaneously reducing the chair.

How do you adjust the height of a desk?

To adjust the height of a desk, Locate the adjustment knob or lever. This is usually located on the underside of the desk near the base. Once you have found the knob or lever, turn it clockwise to raise the desk or counterclockwise to lower it.

Ron Mason
I, Ron Mason, am a retired forestry professional. My previous profession was that of an environmental educator, specifically as a Forester, with the USDA Forest Service. Additionally, I have worked as a contract forester in the private sector. With a strong background in science and engineering, my expertise lies in timber stand management, forest ecology, and wildlife biology. I am a dedicated woodworker and take pleasure in crafting furniture, tables, cabinets and other wooden items as a hobby.